Indoor Conventional Fireplace

The Conventional fireplace is our most popular and best-selling indoor model. The firebox features an expertly-engineered angled back wall that provides better heat reflection as well as a more traditional look. In addition, as with our other firebox models, it has a radius lintel and a 15″ flue (compared to the leading competitor’s 13″) for improved smoke draw performance

Our Conventional model is compatible with either masonry chimneys or UL 103 metal chimney systems.

Traditional sizes: 30″, 36″, 42″ and 48″
Oversized models available in 60″ and 72″ openings with dual chimney systems
Traditional-style firebox with angled back wall (straight-back wall option also available)
Compliances: UL-127, ANSI Z21.60, wind load, seismic testing, ICC report issued
Accommodates FireRock masonry fireplace or approved metal chimney system
Can be installed on a combustible floor using LiteRock installation method (up to 48″ model)
Oversized models available in 60″ and 72″ openings with dual chimney systems
1″ clearance to combustibles around firebox unit and smoke chamber
Easy access to the conventional model and size you need with our national network of distributors

Click Here to View the Brochure

Design & Customization

All FireRock indoor models can be used indoors or outdoors and can accommodate practically any veneer, mantle or surround. Popular indoor options include marble, ledgestone, wood, brick and stone veneer. Popular outdoor options include man-made stone or sliced natural stone. For ideas and inspiration on how to customize your surround, click here.

Additional customization comes with your firebrick selection. FireRock firebrick comes in two colors – red and buff – and two thicknesses to accommodate a variety of firebrick patterns to finish out your personal taste.

Click Here for the Installation Manual

Oversized Installation Manual

ICC Report

Clearance to Combustibles

Specifications

FIREROCK CONVENTIONAL MODEL DIMENSIONS

All measurements listed are based on dry stack units before firebrick is installed. Dimensions are nominal and are given for design and framing reference only. Please consult installation manual for all details and requirements before making final design layout decisions.

MODEL	WIDTH			HEIGHT				DEPTH		DAMPER	WEIGHT
MODEL	Opening	Firebox Rear	Overall	Opening	Firebox	Smoke Chamber	Overall	Firebox	Overall	DAMPER	WEIGHT
30″ Conventional / CA Conventional	32.5″	22″	38″	33.75″	37.5″	22.375″	59.875″	22.5″	28.5″	24″	1,800 lbs
36″ Conventional / CA Conventional	38.5″	28″	44″	33.75″	37.5″	31.5625″	69.0625″	22.5″	28.5″	30″	2,150 lbs
42″ Conventional / CA Conventional	44.5″	34″	50″	33.75″	37.5″	31.5625″	69.0625″	22.5″	28.5″	36″	2,410 lbs
48″ Conventional / CA Conventional	50.5″	40″	56″	33.75″	37.5″	40.75″	78.25″	22.5″	28.5″	42″	2,900 lbs
60″ Oversized Conventional	62.5″	52″	68″	33.75″	37.5″	31.5625″	69.0625″	22.5″	28.5″	54″	3,000 lbs
72″ Oversized Conventional	74.5″	64″	80″	33.75″	37.5″	31.5625″	69.0625″	22.5″	28.5″	2 Top Seal	3,200 lbs

Chimney Diameter	Masonry Chimney: 15″ UL 103 Metal Chimney: 12″ (30″ model only) or 14″*Note: 60″ and 72″ models require 2 flues
Total Installed Height	Minimum: 15′ Maximum: 65′

CLEARANCE TO COMBUSTIBLES

Opening to Sidewall	28″
Opening to Combustible Trim	12″
Opening to Mantle with 8″ Depth	16″
Noncombustible Hearth Extension	20″ in front; 8″ each side *
Firebox & Smoke Chamber to Combustibles or Framing	1″
Smoke Chamber (Front Wall & Top) to Wood Framing	1″
* The 60” and 72” Oversized Conventional models require extra floor protection in addition to the 20” full depth hearth extension listed. The amount of additional floor protection is dependent upon the opening height of the firebox, and must be constructed of a noncombustible material with a minimum R-value of 0.30. See Oversized Installation Manual for more information.

APPROVALS & CERTIFICATIONS (30″ – 48″)

UL 127 approved and certified for indoor or outdoor use	ICC tested and certified properties: wind load, seismic, and fire resistances
Compliant with 2012 and 2015 International Codes: Building (IBC), Residential (IRC), Mechanical (IMC), and Fuel Gas (IFGC)	Approved for use with gas-starters and outside air kits

AVAILABLE ACCESSORIES – Click Links Below

Bricking Flange	Metal Chimney
Height Extension Kit	Offset Blocks
Solid Block Chimney	Chimney Pots
Firebrick & Mortar	Outside Air Kits
Dampers	Log Lighter